Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 209)

Brocade Virtual ADX MIB Reference 197
53-1003312-01
Virtual server objects
• The Virtual Server Port Status Table (snL4VirtualServerPortStatusTable) has been
replaced by the Virtual Server Port Statistics Table
(snL4VirtualServerPortStatisticTable).
Additional tables for virtual servers are included in the section “Monitor groups” on page 208 .
Those tables provide historical information on data samples for virtual servers and virtual server
ports.
Virtual server configuration table
The Virtual Server Configuration table allows you to configure virtual servers on the ServerIron.
Name, OID, and Syntax Access Description
snL4VirtualServerCfgTable
brcdIp.1.1.4.21.1 None The Virtual Server Configuration table.
snL4VirtualServerCfgEntry
brcdIp.1.1.4.21.1.1 None An entry in the Virtual Server Configuration table.
snL4VirtualServerCfgVirtualIP
brcdIp.1.1.4.21.1.1.1
Syntax: IpAddress Read only Specifies the virtual server IP Address.
snL4VirtualServerCfgName
brcdIp.1.1.4.21.1.1.2
Syntax: L4ServerName Read-write Specifies the name of the virtual server. This name must be
unique among the other virtual servers.
Valid values: 1 – 32 octets
snL4VirtualServerCfgAdminStatus
brcdIp.1.1.4.21.1.1.3
Syntax: L4Status Read-write Indicates if the virtual server feature is enabled on the
ServerIron:
•
disabled(0)
•
enabled(1)
Default: enabled(1)
snL4VirtualServerCfgSDAType
brcdIp.1.1.4.21.1.1.4
Syntax: Integer Read-write Specifies the load-balancing or Session Distribution Algorithm
method that the ServerIron uses to select a real server for a
client request. The following methods are supported:
•
default(0) – The ServerIron uses the global SDAType
configured (snL4SlbGlobalSDAType)
•
leastconnection(1) – The ServerIron sends the request to
the real server that currently has the fewest active
connections with clients.
•
roundrobin(2) – The ServerIron sends the request to each
real server in rotation, regardless of how many
connections or sessions each real server has.
•
weighted(3) – The ServerIron uses the weights you assign
to the real servers to select a real servers. The weights are
based on the number of session table entries the switch
has for each server.
Default: default(0)