Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 217)

Brocade Virtual ADX MIB Reference 205
53-1003312-01
GSLB DNS zone information table
GSLB DNS zone information table
The GSLB DNS zone information table contains show gslb dns zone and show gslb dns detail
information.
snL4GslbSiteRemoteServerIronIP
brcdIp.1.1.4.27.1.1.1
Syntax: IpAddress Read only Specifies the management IP address of the remote
ServerIron in a site. This address must not be any of the
configured VIPs.
snL4GslbSiteRemoteServerIronPr
eference
brcdIp.1.1.4.27.1.1.2
Syntax: Integer Read-write Specifies the preference of a remote ServerIron. This metric is
a numeric preference value, that is assigned to each site
ServerIron. It is used to select that ServerIron if the previous
metrics do not select a best site. The GSLB policy prefers the
site ServerIron with the highest administrative preference. The
preference allows to do the following.
•
Temporarily change the preference of a ServerIron site to
accommodate changing network conditions. For
example, if sites are offering proxy content service, the
link between a site proxy server farm and the content
origin may be highly congested, making that site less
desirable. This factor is not visible to the ServerIrons and
thus cannot be reflected in the other GSLB metrics.
•
Temporarily disqualify a site ServerIron from being
selected, without otherwise changing the site
configuration or the GSLB ServerIron configuration. For
example, maintenance can be performed on the site
ServerIron without making network changes. In this case,
set the preference to 0.
•
A GSLB ServerIron can be biased, that is, it can be
configured as a site ServerIron (for locally configured
VIPs) to always favor itself as the best site. In this case,
assign a preference of 255 to the site for the GSLB
ServerIron itself, and assign a lower preference to the
other site ServerIrons, or use the default (128) for those
sites.
The administrative preference is disabled by default, which
means it is not included as one of the GSLB metrics. When
this metric is enabled, the default administrative preference
for sites is applied. It can be changed on an individual site
basis."
Valid values: 0 – 255
Default: 128
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snL4GslbDnsZonesInfoTable
brcdIp.1.1.4.30.1 None The GSLB DNS Zone Information Table.
snL4GslbDnsZonesEntry
brcdIp.1.1.4.30.1.1 None An entry in the GSLB DNS Zone Information Table.
snL4GslbDnsZoneName
brcdIp.1.1.4.30.1.1.1
Syntax: DisplayString Read only Specifies the GSLB DNS zone name.
Value values 1 - 64.