Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 151)

Brocade Virtual ADX MIB Reference 139
53-1003312-01
OSPF interface configuration tables
OSPF interface configuration tables
The OSPF Interface Table augments the ifTable with OSPF specific information.
References:
• Reference: RFC 1583 “OSPF Version 2”, section C.3 Router interface parameters.
• Reference: RFC 1583 “OSPF Version 2”, section E Authentication.
OSPF interface configuration table
Name, OID, and Syntax Access Description
snOspfAreaRangeTable
brcdIp.1.2.4.3.1 None The Area Range Table.
snOspfAreaRangeEntry
brcdIp.1.2.4.3.1.1 None An entry in the Area Range Table.
snOspfAreaRangeAreaID
brcdIp.1.2.4.3.1.1.1
Syntax: AreaID Read only Specifies the ID of the area where the address range can be
found. The object
“snOspfAreaRangeAreaIdFormat” determines
the format of this object.
snOspfAreaRangeNet
brcdIp.1.2.4.3.1.1.2
Syntax: IpAddress Read only Specifies the IP Address of the net or subnet indicated by the
range.
snOspfAreaRangeMask
brcdIp.1.2.4.3.1.1.3
Syntax: IpAddress Read-write Specifies the subnet mask that pertains to the net or subnet.
snOspfAreaRangeRowStatus
brcdIp.1.2.4.3.1.1.4
Syntax: Integer Read-write Controls the management of the table rows. The values that can
be written are:
•
delete(3) – Delete the row
•
create(4) – Create a new row
•
modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row
•
invalid(1) – Row is inoperative
•
valid(2) – Row exists and is valid
snOspfAreaRangeAreaIdFormat
brcdIp.1.2.4.3.1.1.5
Syntax: Integer Read only Specifies the format of how Area ID will be entered in the
“snOspfAreaRangeAreaID” object:
•
integer(0) – Integer.
•
ipAddress(1) – IP Address.
Name, OID, and Syntax Access Description
snOspfIfTable
brcdIp.1.2.4.4.1 None The OSPF Interface Configuration Table.
snOspfIfEntry
brcdIp.1.2.4.4.1.1 None An entry in the OSPF Interface Configuration Table.