Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 174)

162 Brocade Virtual ADX MIB Reference
53-1003312-01
OSPF routing information table
OSPF routing information table
The OSPF Routing Information Table contains information on the OSPF ABR or ASBR routing.
The Open Shortest Path First (OSPF) protocol fully complies with RFC 1850 - OSPF Version 2
Management Information Base.
r
Name, OID, and Syntax Access Description
snOspfRoutingInfoTable
brcdIp.1.2.4.14.1 None The OSPF Routing Information Table.
snOspfRoutingInfoEntry
brcdIp.1.2.4.14.1.1 None An entry in the OSPF Routing Information Table.
snOspfRoutingInfoIndex
brcdIp.1.2.4.14.1.1.1
Syntax: Integer32 Read only ID of an entry in this table.
snOspfRoutingInfoRouter
brcdIp.1.2.4.14.1.1.2
Syntax: RouterID Read only Shows the ID or IP address of the destination router.
snOspfRoutingInfoRouterType
brcdIp.1.2.4.14.1.1.3
Syntax: Integer Read only Shows what router type the destination router is:
•
abr(1) – Area Border Router.
•
asbr(2) – Autonomous System Border Router.
•
abrANDasbr(3) – Area Border and Autonomous System
Border Router.
snOspfRoutingInfoNextHopRouterID
brcdIp.1.2.4.14.1.1.4
Syntax: RouterID Read only Shows the ID or IP address of the next hop destination
router.
snOspfRoutingInfoOutgoingInterface
brcdIp.1.2.4.14.1.1.5
Syntax: Integer32 Read only Shows the outgoing interface of the destination router.
snOspfAdminStat
brcdIp.1.2.4.1.2
Syntax: Integer Read-write Specifies the state of the OSPF in the router:
•
disabled(0) – OSPF is disabled on all interfaces
•
enabled(1) – OSPF is active on at least one interface