Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 241)

Brocade Virtual ADX MIB Reference 229
53-1003312-01
Real Server Port configuration table
brcdSlbRSPortCfgIpType
brcdIp.1.1.4.37.1.2.2.1.3
Syntax: InetAddressType Read-write Address type of the Real Server.
brcdSlbRSPortCfgIp
brcdIp.1.1.4.37.1.2.2.1.4
Syntax: InetAddress Read-write The IP address of the Real Server.
brcdSlbRSPortCfgAdminStatus
brcdIp.1.1.4.37.1.2.2.1.5
Syntax: L4Status Read-write Administrative status of the Real Server port.
brcdSlbRSPortCfgMaxConnections
brcdIp.1.1.4.37.1.2.2.1.6
Syntax: Unsigned32 Read-write Real Server port maximum number of connections allowed.
brcdSlbRSPortCfgDeleteState
brcdIp.1.1.4.37.1.2.2.1.7
Syntax: L4DeleteState Read-only Delete status of the Real Server port.
brcdSlbRSPortCfgBackupPriRSNa
me
brcdIp.1.1.4.37.1.2.2.1.8
Syntax: L4ServerName Read-write Name of the backup primary Real Server.
brcdSlbRSPortCfgBackupAssocPri
brcdIp.1.1.4.37.1.2.2.1.9
Syntax: TruthValue Read-write Backup server to be used if all the primary servers are
unavailable for the requested application. The value "true"
indicates that BackupAssocPri is enabled. The default is "false".
brcdSlbRSPortCfgBringupRetries
brcdIp.1.1.4.37.1.2.2.1.10
Syntax: Unsigned32 Read-write ServerIron ADX will bring up the port only after it has passed the
specified number of health-checks. Default is 0.
brcdSlbRSPortCfgL4BringupInterv
al
brcdIp.1.1.4.37.1.2.2.1.11
Syntax: Unsigned32 Read-write L4 bring up check interval. Default is 0.
brcdSlbRSPortCfgClearSessOnPor
tUp
brcdIp.1.1.4.37.1.2.2.1.12
Syntax: TruthValue Read-write Enables or disables clean up of sessions on port up. The default
is “false”.
brcdSlbRSPortCfgDnssecCapable
brcdIp.1.1.4.37.1.2.2.1.13
Syntax: TruthValue Read-write When configured to "true", Real Server port is DNSSEC capable.
The default is "false".
brcdSlbRSPortCfgL4CheckOnly
brcdIp.1.1.4.37.1.2.2.1.14
Syntax: TruthValue Read-write When configured to "true", ServerIron ADX uses L4 keepalive
health checks. The default is "false".
brcdSlbRSPortCfgL7BringupInterv
al
brcdIp.1.1.4.37.1.2.2.1.15
Syntax: Unsigned32 Read-write L7 bring up check interval. The default is 0.
brcdSlbRSPortCfgNoHealthCheck
brcdIp.1.1.4.37.1.2.2.1.16
Syntax: TruthValue Read-write Enables or disables L4 health checks of the port. The default is
"false".
Name, OID, and Syntax Access Description