Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 283)

Brocade Virtual ADX MIB Reference 271
53-1003312-01
Virtual ADX traps
snTrapL4FirewallBecomeAct
ive
brcdIp.0.48 Major The Server Load Balancing switch
firewall changed its state from standby
to active.
Trap Message:
firewall group #
become active
snTrapL4FirewallPathUp
brcdIp.0.49 Minor The Server Load Balancing switch
firewall path is up.
Trap Message:
firewall path up target
nexthop path port
snTrapL4FirewallPathDown
brcdIp.0.50 Minor The Server Load Balancing switch
firewall path is down.
Trap Message:
Firewall path down target
nexthop path
port
snTrapL4ContentVerification
brcdIp.0.55 Informational The HTTP match list pattern has been
found.
Trap Message:
HTTP match-list pattern is
found.
snTrapL4TcpAttackRateExce
edMax
brcdIp.0.69 snAgGblTrapMessage Critical The TCP attack rate exceeds the
configured maximum TCP attack rate.
Trap Message:
L4 TCP Attack Rate Exceed Max
snTrapL4TcpAttackRateExce
edThreshold
brcdIp.0.70 snAgGblTrapMessage Warning The TCP attack rate exceeds 80% of the
configured maximum.
Trap Message:
L4 TCP Attack Rate Exceed Threshold
snTrapL4ConnectionRateExc
eedMax
brcdIp.0.71 snAgGblTrapMessage Critical Layer 4 connection rate exceeds the
configured maximum.
Trap Message:
L4 Connection Rate Exceed Max
snTrapL4ConnectionRateExc
eedThreshold
brcdIp.0.72 snAgGblTrapMessage Warning The Layer 4 connection rate exceeds
80% of the configured maximum.
Trap Message:
L4 Connection Rate Exceed
Threshold
snTrapL4SymBecomeStand
by
brcdIp.0.501
NOTE: This object is
supported only on
devices that support
Layer 4 features.
snAgGblTrapMessage Notification The SNMP trap that is generated when
Sym VIP changed state from active to
standby.
Trap Message:
L4-Sym become standby
Trap Name and Number Varbinds Severity Description and Trap Message