Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 96)

84 Brocade Virtual ADX MIB Reference
53-1003312-01
ACLs
snAgAclDestinationOpera
tor
brcdIp.1.2.2.15.2.1.13
Syntax: Operator Read-write Applies only to TCP or UDP ports in extended ACLs.
Indicates how the policy will be compared to the ports specified in the
“snAgAclDestinationOperand1” and “snAgAclDestinationOperand2”
objects:
•
eq(0) – The policy applies only to packets whose destination port
number matches the port number specified in the objects.
•
neq(1) – The policy applies only to packets whose destination port
numbers are not included in the specified range.
•
lt(2) – The policy applies only to packets whose destination port
numbers are less than those in the specified range.
•
gt(3) – The policy applies only to packets whose destination port
numbers are greater than those in the specified range.
•
range(4) – The policy applies to packets whose destination port
numbers fall within the specified range.
•
undefined(7)
snAgAclDestinationOpera
nd1
brcdIp.1.2.2.15.2.1.14
Syntax: Integer Read-write Applies only to TCP or UDP ports in extended ACLs.
Shows the destination port number to be matched. If used with the
“snAgAclDestinationOperand2” object, it defines the start of the range of
destination port numbers to be matched.
Valid values: 0 – 65535. A value of 0 means that this object is not
applicable.
snAgAclDestinationOpera
nd2
brcdIp.1.2.2.15.2.1.15
Syntax: Integer Read-write Applies only to TCP or UDP ports in extended ACLs.
Used with the
“snAgAclDestinationOperand1” object, it defines the end
of the range of destination port numbers to be matched.
Valid values: 0 – 65535. A value of 0 means that this object is not
applicable.
snAgAclPrecedence
brcdIp.1.2.2.15.2.1.16
Syntax: PrecedenceValue Read-write Applies only to extended ACLs.
Indicates the IP precedence value that a packet must have to be
permitted or denied.
•
routine(0)
•
priority(1)
•
immediate(2)
•
flash(3)
•
flash-override(4)
•
critical(5)
•
internet(6)
•
network(7)
The following priorities specify a hardware forwarding queue: routine(0),
priority(1), immediate(2), flash(3)
snAgAclTos
brcdIp.1.2.2.15.2.1.17
Syntax: TosValue Read-write Applies only to extended ACLs.
Indicates the type of service a packet must have to be denied or
permitted:
•
normal(0) – The ACL matches packets that have the normal
TOS. If TOS is not defined, packets are matched to this value.
•
minMonetaryCost(1) – The ACL matches packets that have the
minimum monetary cost TOS.
•
maxReliability(2) – The ACL matches packets that have the
maximum reliability TOS.
•
maxThroughput(4) – The ACL matches packets that have the
maximum throughput TOS.
•
minDelay(8) – The ACL matches packets that have the minimum
delay TOS
.
Name, OID, and Syntax Access Description