Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 113

Brocade Virtual ADX MIB Reference
101
53-1003312-01
VLAN by port information table
snVLanByPortStpGroupForw
ardDelay
brcdIp.1.1.3.2.1.1.9
Syntax: Integer
Read-write
Shows the value of dot1dStpBridgeForwardDelay, which is the value
used by all bridges for ForwardDelay when this bridge is acting as
the root.
NOTE: 802.1D-1990 specifies that the range for this parameter is
related to the value of dot1dStpBridgeMaxAge, which is in
the object
.
The granularity of this timer is specified by 802.1D-1990 to
be one second. An agent may return a badValue error if a set
is attempted to a value which is not a whole number of
seconds.
(Refer to RFC1493 Bridge MIB).
Valid values: 2 –30.
snVLanByPortRowStatus
brcdIp.1.1.3.2.1.1.10
Syntax: Integer
Read-write
Controls the management of the table rows. The values that can be
written are:
•
delete(3) – Delete the row
•
create(4) – Create a new row
•
modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row
•
invalid(1) – Row is inoperative
•
valid(2) – Row exists and is valid
snVLanByPortOperState
brcdIp.1.1.3.2.1.1.11
Syntax: Integer
Read only
Activates the VLAN entry and sets it to running mode.
•
notActivated(0) – The VLAN entry is not activated and not in
running mode
•
activated(1) – The VLAN entry is activated and in running mode
Default: notActivated(0)
snVLanByPortBaseNumPort
s
brcdIp.1.1.3.2.1.1.12
Syntax: Integer32
Read only
Indicates the number of ports controlled by this bridging entity.
snVLanByPortBaseType
brcdIp.1.1.3.2.1.1.13
Syntax: Integer
Read only
Indicates what type of bridging this bridge can perform. If a bridge is
actually performing a certain type of bridging this will be indicated
by entries in the port table for the given type.
•
unknown(1)
•
transparent-only(2)
•
sourceroute-only(3)
•
srt(4)
snVLanByPortStpProtocolSp
ecification
brcdIp.1.1.3.2.1.1.14
Syntax: Integer
Read only
Shows what version of STP is being run:
•
unknown(1)
•
decLb100(2) – Indicates the DEC LANbridge 100 Spanning
Tree protocol
•
ieee8021d(3) – Returns "ieee8021d(3)". If future versions of
the IEEE Spanning Tree Protocol are released that are
incompatible with the current version, a new value will be
defined.
Name, OID, and Syntax
Access
Description