Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 279)

Brocade Virtual ADX MIB Reference 267
53-1003312-01
Virtual ADX traps
BGP traps
Port security traps
The Port Security feature enables a device to learn a limited number of “secure” MAC addresses on
an interface. The interface will forward only those packets with source MAC addresses that match
these secure addresses. If the interface receives MAC addresses that are included in its secure
MAC list, the device generates the following traps:
NOTE
This trap applies to ports that have the Port Security feature enabled.
SNMP traps for RSVP-signaled LSP state
SNMP traps that identify when an RSVP-Signaled LSP goes up and down and also when an LSP
switches traffic to a new active path.
Trap Name and Number Varbinds Severity Description and Trap Message
snTrapBgpPeerUp
brcdIp.0.65 snAgGblTrapMessage Informational The BGP peer is up.
Trap Message:
BGP Peer UP(ESTABLISHED)
snTrapBgpPeerDown
brcdIp.0.66 snAgGblTrapMessage Informational The BGP peer is down.
Trap Message:
BGP Peer DOWN
()\n
Trap Name and Number Varbinds Severity Description and Trap Message
snTrapPortSecurityViolation
brcdIp.0.77 snAgGblTrapMessage Minor Packets from unknown MAC address are
dropped.
Sample Trap Message:
Brocade Trap: Port
Security Violation
snTrapPortSecurityShutdow
n
brcdIp.0.78 snAgGblTrapMessage Minor The port is disabled for the amount of time
configured using the violation shutdown
port security CLI command.
Sample Trap Message:
Brocade Trap: Port
Security Violation Cause
Shutdown
Trap Name and Number Varbinds Severity System Message Format
snMplsLspUp
brcdIp.0.139 mplsLspName
mplsLspPathN
ame Informational Informs that the specified RSVP-signaled LSP
using the specified active path is up.