Snagaclicmpcode – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 98

86
Brocade Virtual ADX MIB Reference
53-1003312-01
ACLs
snAgAclDscpMarking
brcdIp.1.2.2.15.2.1.28
Syntax: Integer
Read-write
Indicates the DSCP marking of a packet that will be matched.
Valid values: 0 – 64
Default: Not defined(64)
snAgAclDscpMapping
brcdIp.1.2.2.15.2.1.29
Syntax: Integer
Read-write
Indicates the DCSP value of the incoming packet value to be matched.
Valid values: 0 – 64
Default: Not defined(64)
snAgAclIcmpCode
brcdIp.1.2.2.15.2.1.30
Syntax: Integer
Read write
If you entered a value for ICMP message type number in the
object, enter the code number in this object.
Valid value for type code 1, Echo reply
•
1 = Echo reply
Valid values for type code4, Destination unreachable
•
1 = Network unreachable
•
2 = Host unreachable
•
3 = Protocol unreachable
•
4 = Port unreachable
•
5 = Fragmentation needed by don't fragment bit set
•
6 = Source route failed
•
7 = Destination network unknown
•
8 = Destination host unknown
•
9 = Source host isolated
•
10 = Destination network administratively prohibited
•
11 = Destination host administratively prohibited
•
12 = Network unreachable for TOS
•
13 = Host unreachable for TOS
•
14 = Communication administratively prohibited by filter
•
15 = Host precedence violation
•
16 = Precedence cutoff in effect
VValid values for type code 5, Source quench
•
1 = Source quench
alid values for type code 6, Redirect
•
1 = Redirect for network
•
2 = Redirect for host
•
3 = Redirect for TOS and network
•
4 = Redirect for TOS and host
Valid value for type code 9, Echo request
•
1 = Echo request
Valid value for type code 10, Router advertisement
•
1 = Router advertisement
Valid value for type code 11, Router solicitation
•
1 = Router solicitation
Valid values for type code 12, Time exceeded
•
1 = Time to live equals 0 during transmit
•
2 = Time to live equals 0 during reassembly
Valid values for type code 13, Parameter problem
•
1 = IP header bad (catchall error)
•
2 = Required option missing
Name, OID, and Syntax
Access
Description