Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 240)

228 Brocade Virtual ADX MIB Reference
53-1003312-01
Real Server Port configuration table
Real Server Port configuration table
The brcdSlbRSPortCfgTable manages the configuration of Real Server port objects. The object
brcdSlbRSPortCfgRowStatus is required to configure objects for Real Server ports and should be
set to create, delete, or modify.
brcdSlbRSCfgByteRateThreshold
brcdIp.1.1.4.37.1.2.1.1.16
Syntax: Unsigned32 Read-write Maximum byte rate allowed for the Real Server. Valid values are
0 - 2147483647. The default is 2147483647.
brcdSlbRSCfgHostRange
brcdIp.1.1.4.37.1.2.1.1.17
Syntax: Unsigned32 Read-write Specifies number of hosts in the range beginning with Real
Server IP. Valid values are 0 - 4096.
brcdSlbRSCfgMaxTcpConnRate
brcdIp.1.1.4.37.1.2.1.1.18
Syntax: Unsigned32 Read-write Maximum TCP connections per second. Valid values are 1-
4294967295.
brcdSlbRSCfgMaxUdpConnRate
brcdIp.1.1.4.37.1.2.1.1.19
Syntax: Unsigned32 Read-write Maximum UDP connections per second. Valid values are 1 -
4294967295.
brcdSlbRSCfgExceedMaxDrop
brcdIp.1.1.4.37.1.2.1.1.20
Syntax: TruthValue Read-write Drop new connection when maximum connection limit is
reached for L7 switching. The value "true" indicates
exceedMaxDrop is enabled. Default is false.
brcdSlbRSCfgL3Check
brcdIp.1.1.4.37.1.2.1.1.21
Syntax: TruthValue Read-write Administrative status of L3 check. The value "true" indicates
L3Check is enabled. Default is "true".
brcdSlbRSCfgReverseNat
brcdIp.1.1.4.37.1.2.1.1.22
Syntax: TruthValue Read-write When enabled reverse NAT is not performed even if it is globally
configured. The value "true" indicates ReverseNAT is enabled.
Default is false.
brcdSlbRSCfgResponseTimeLower
brcdIp.1.1.4.37.1.2.1.1. 23
Syntax: Unsigned32 Read-write Lower threshold in msecs. Configuring the response time load
balancing method requires smooth factor to be configured
Default is 0.
brcdSlbRSCfgResponseTimeHighe
r
brcdIp.1.1.4.37.1.2.1.1. 24
Syntax: Unsigned32 Read-write Higher threshold in msecs. Configuring the response time load
balancing method requires smooth factor to be configured
Default is 0.
brcdSlbRSCfgRowStatus
brcdIp.1.1.4.37.1.2.1.1.25
Syntax: RowStatus Read-write This object is used to create, delete, or modify Real Server.
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
brcdSlbRSPortCfgName
brcdIp.1.1.4.37.1.2.2.1.1
Syntax: L4ServerName N/A Name of the Real Server.
brcdSlbRSPortCfgPort
brcdIp.1.1.4.37.1.2.2.1.2
Syntax: Unsigned32 N/A Port number of the Real Server. Valid values are 0 - 65535.