Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 170)

158 Brocade Virtual ADX MIB Reference
53-1003312-01
OSPF interface status table
snOspfIfStatusRtrDeadInterv
al
brcdIp.1.2.4.12.1.1.11
Syntax: PositiveInteger Read only Specifies the number of seconds that neighbor routers wait for a
router’s Hello packets before they declare that the router is down.
This should be a multiple of the Hello interval and must be the same
for all routers attached to a common network.
Default: 40 seconds
snOspfIfStatusState
brcdIp.1.2.4.12.1.1.12
Syntax: Integer Read only Shows the OSPF Interface State.
•
down(1)
•
loopback(2)
•
waiting(3)
•
pointToPoint(4)
•
designatedRouter(5)
•
backupDesignatedRouter(6)
•
otherDesignatedRouter(7)
Default: down(1)
snOspfIfStatusDesignatedRo
uter
brcdIp.1.2.4.12.1.1.13
Syntax: IpAddress Read only Shows the IP Address of the designated router.
Default: ’00000000’h, which equals to 0.0.0.0
snOspfIfStatusBackupDesign
atedRouter
brcdIp.1.2.4.12.1.1.14
Syntax: IpAddress Read only Shows the IP Address of the backup router.
Default: ’00000000’h, which equals to 0.0.0.0
snOspfIfStatusEvents
brcdIp.1.2.4.12.1.1.15
Syntax: Counter32 Read only Shows the following:
•
The number of times that the state of this OSPF interface has
changed
•
The number of times an error has occurred
snOspfIfStatusAuthType
brcdIp.1.2.4.12.1.1.16
Syntax: Integer32 Read only Specifies the authentication type for an interface.
Valid values::
•
none(0)
•
simplePassword(1)
•
md5(2)
•
reserved for specification by IANA(> 2)
Additional authentication types may be assigned locally on a per
interface basis.
Default: none(0)
Name, OID, and Syntax Access Description