Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 265)

Brocade Virtual ADX MIB Reference 253
53-1003312-01
Standard traps
Standard traps
This section present the standard traps supported on devices.
System status traps
Brocade supports the following traps from RFC 1215:
Traps for spanning tree protocol
Brocade supports for the following traps for Spanning Tree Protocol from RFC 1493.
snL4EnableGslbRemoteSiDow
nTrap
brcdIp.1.1.4.1.49
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the GSLB connection from this GSLB to the remote ServerIron is
DOWN:
•
disabled(0)
•
enabled(1)
snL4EnableGslbRemoteSiUpTr
ap
brcdIp.1.1.4.1.50
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the GSLB connection from this GSLB to remote the ServerIron is
UP:
•
disabled(0)
•
enabled(1)
Name, OID, and Syntax Access Description
Trap Name and Number Varbind Description
coldStart
1.3.6.1.6.3.1.1.5.1 (None) Indicates that the sending protocol entity is reinitializing itself: the
agent's configuration or the protocol entity implementation may be
altered.
warmStart
1.3.6.1.6.3.1.1.5.2 (None) Indicates that the sending protocol entity is reinitializing itself;
however, the agent configuration nor the protocol entity
implementation is not altered.
linkDown
1.3.6.1.6.3.1.1.5.3 ifIndex(1)
ifDescr(2) A failure in one of the communication links.
For example,
Interface , state down
linkUp
1.3.6.1.6.3.1.1.5.4 ifIndex(1)
ifDescr(2) The communication link is up.
For example,
Interface , state up
authenticationFailure
1.3.6.1.6.3.1.1.5.5 (none) Indicates that the sending protocol entity is the addressee of a
protocol message that is not properly authenticated. While
implementations of the SNMP must be capable of generating this
trap, they must also be capable of suppressing the emission of such
traps through an implementation-specific mechanism.