Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 130)

118 Brocade Virtual ADX MIB Reference
53-1003312-01
IP general group
IP general group
The following are general objects for the IP group.
Name, OID, and Syntax Access Description
snRtClearArpCache
brcdIp.1.2.2.1.1
Syntax: ClearStatus Read-write Clears learned ARP entries but does not remove any static ARP entries.
The value for this object can be:
•
normal(0) – Do not clear learned entries
•
clear(1) – Clear learned entries
This object is also available in the ServerIron.
snRtClearIpCache
brcdIp.1.2.2.1.2
Syntax: ClearStatus Read-write Clears the entries in the “IP forwarding cache table” . The value for this
object can be:
•
normal(0) – Do not clear entries
•
clear(1) – Clear entries
•
This object is also available in the ServerIron.
snRtClearIpRoute
brcdIp.1.2.2.1.3
Syntax: ClearStatus Read-write Clears the IP route tables. The value for this object can be:
•
normal(0) – Do not clear entries
•
clear(1) – Clear entries
•
This object is also available in the ServerIron.
snRtBootpServer
brcdIp.1.2.2.1.4
Syntax: IpAddress Read-write Shows the IP address of the bootp server to which bootp packet need to
be relayed.
snRtBootpRelayMax
brcdIp.1.2.2.1.5
Syntax: Integer Read-write Specifies the maximum number of hops the bootp packet should travel.
Valid values: Up to 15 hops
snRtArpAge
brcdIp.1.2.2.1.6
Syntax: Integer Read-write Specifies the number of minutes that an ARP entry can be valid without
having to be relearned.
Valid values: Up to 240 minutes. A value of zero (0) means that the entry
will not age out.
snRtIpIrdpEnable
brcdIp.1.2.2.1.7
Syntax: Integer Read-write Indicates if router advertisement is enabled on this device:
•
disabled(0)
•
enabled(1)
snRtIpLoadShare
brcdIp.1.2.2.1.8
Syntax: Integer Read-write Indicates if more than one route will be enabled to share the loads:
•
disabled(0)
•
enabled(1)
snRtIpProxyArp
brcdIp.1.2.2.1.9
Syntax: Integer Read-write Indicates if the proxy ARP function is enabled:
•
disabled(0)
•
enabled(1)
snRtIpRarp
brcdIp.1.2.2.1.10
Syntax: Integer Read-write Indicates if the RARP server is enabled:
•
disabled(0)
•
enabled(1)
snRtIpTtl
brcdIp.1.2.2.1.11
Syntax: Integer Read-write Indicates the time-to-live (TTL) value that will be used in the IP header of
an IP packet that was generated by this device.
Valid values: 1 – 255