Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 223)

Brocade Virtual ADX MIB Reference 211
53-1003312-01
Monitor groups
Name, OID, and Syntax Access Description
snL4RealServerHistoryTable
brcdIp.1.1.4.28.2 None The Real Server History Group table.
snL4RealServerHistoryEntry
brcdIp.1.1.4.28.2.1 None An entry in the Real Server History Group table. An entry is a
historical sample of statistics on a particular real server. This
sample is associated with the
“snL4RealServerHistoryControlEntry” object, which sets up the
parameters for a regular collection of these samples.
snL4RealServerHistoryIndex
brcdIp.1.1.4.28.2.1.1
Syntax: Integer Read only Shows the index entry as identified by the
“snL4RealServerHistoryControlIndex” .
snL4RealServerHistorySampleInd
ex
brcdIp.1.1.4.28.2.1.2
Syntax: Integer Read only An index that uniquely identifies this particular sample among
all samples associated with the same entry. This index starts at
1 and increases by one as each new sample is taken. There can
be up to 214,748,3647 samples.
snL4RealServerHistoryIntervalSta
rt
brcdIp.1.1.4.28.2.1.3
Syntax: Time ticks Read only The value of sysUpTime at the start of the interval used to
measure data samples.
If the probe keeps track of the time of day, set the data
sampling to start at the beginning of the next hour.
NOTE: Following this rule may require the probe to delay the
collection of the first sample for an entry, since each
sample must be of the same interval. Also, data for the
sample that is currently being collected is not accessible
in this table until the end of its interval.
snL4RealServerHistoryReceivePk
ts
brcdIp.1.1.4.28.2.1.4
Syntax: Counter Read only Shows the number of packets the ServerIron has received from
the real server.
snL4RealServerHistoryTransmitP
kts
brcdIp.1.1.4.28.2.1.5
Syntax: Counter Read only Shows the number of packets the ServerIron has sent to the
real server.
snL4RealServerHistoryTotalConn
ections
brcdIp.1.1.4.28.2.1.6
Syntax: Counter Read only Shows the total number of client connections on the real server.
A connection consists of two sessions: the client-to-server
session and the server-to-client session.
snL4RealServerHistoryCurConnec
tions
brcdIp.1.1.4.28.2.1.7
Syntax: Integer Read only Shows the number of client connections currently on the real
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4RealServerHistoryPeakConn
ections
brcdIp.1.1.4.28.2.1.8
Syntax: Integer Read only Shows the highest number of client connections on the real
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4RealServerHistoryReassign
ments
brcdIp.1.1.4.28.2.1.9
Syntax: Integer Read only Shows the number of times the ServerIron has reassigned the
connection to another real server in the rotation because the
real server that is in use has not responded to two TCP SYNs
from the client.