beautypg.com

Real server port history group – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual

Page 225

background image

Brocade Virtual ADX MIB Reference

213

53-1003312-01

Monitor groups

Real server port history group

The Real Server Port History Group contains history data samples for each port on the real server.

snL4RealServerPortHistoryContro
lInterval
brcdIp.1.1.4.28.3.1.5
Syntax: Integer

Read-write

Shows the interval, in seconds, over which the data is sampled
for each bucket.
NOTE: A counter for a bucket may overflow without any

indication; therefore, be sure to account for the
overflow in all the counters you configure. Consider the
minimum time it takes for a counter to overflow and set
this object (snL4RealServerPortHistoryControlInterval)
to a value less than the overflow interval. This is
especially important for the “octets” counter in any
data-source table.

You cannot modify the value of this object if the value of this
entry’s

“snL4RealServerPortHistoryControlStatus”

object is

equal to valid(1).
Valid values: 1 – 3600 seconds
Default: 1800 seconds

snL4RealServerPortHistoryContro
lOwner
brcdIp.1.1.4.28.3.1.6
Syntax: DisplayString

Read-write

The administrator who owns or configured this entry.

snL4RealServerPortHistoryContro
lStatus
brcdIp.1.1.4.28.3.1.7
Syntax: Integer

Read-write

The state of this entry:

valid(1)

createRequest(2)

underCreation(3)

invalid(4) – This entry will be deleted from the table if it is
set to this state.

Name, OID, and Syntax

Access

Description

snL4RealServerPortHistoryTable
brcdIp.1.1.4.28.4

None

The Real Server Port History Group table.

snL4RealServerPortHistoryEntry
brcdIp.1.1.4.28.4.1

None

An entry in the Real Server Port History Group table. An entry is a
historical sample of statistics on a particular real server port.
This sample is associated with the

“snL4RealServerPortHistoryControlEntry”

object, which sets up

the parameters for the regular collection of these samples.

snL4RealServerPortHistoryIndex
brcdIp.1.1.4.28.4.1.1
Syntax: Integer

Read only

Shows the index entry as identified by the

“snL4RealServerPortHistoryControlIndex”

.

snL4RealServerPortHistorySampl
eIndex
brcdIp.1.1.4.28.4.1.2
Syntax: Integer

Read only

An index that uniquely identifies this particular sample among all
samples associated with the same entry. This index starts at 1
and increases by one as each new sample is taken. There can be
up to 214,748,3647 samples.

Name, OID, and Syntax

Access

Description