Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 120)

108 Brocade Virtual ADX MIB Reference
53-1003312-01
VLAN by protocol configuration table
snVLanByProtocolIndex
brcdIp.1.1.3.2.2.1.2
Syntax: Integer Read only Shows the protocol used by this VLAN.
The following IP/IPX protocols are used by VLANs in Layer 3 VLAN:
•
IP(1)
•
IPX(2)
The following protocols are used in Layer 2 bridging:
•
appleTalk(3)
•
decNet(4)
•
netBios(5)
•
others(6) – other protocols which are defined here.
snVLanByProtocolDynamic
brcdIp.1.1.3.2.2.1.3
Syntax: Integer Read-write Applies to only to switches.
Indicates whether or not dynamic port inclusion is enabled:
•
disabled(0)
•
enabled(1)
snVLanByProtocolStaticMas
k
brcdIp.1.1.3.2.2.1.4
Syntax: PortMask Read-write Applies to ServerIron stackable devices. It indicates the standalone
switch Protocol VLAN port membership (portmask) applied in static
mode.
snVLanByProtocolExcludeMa
sk
brcdIp.1.1.3.2.2.1.5
Syntax: PortMask Read-write Applies to ServerIron stackable devices. It indicates the standalone
switch Protocol VLAN port membership (portmask) applied in
exclusive mode.
snVLanByProtocolRouterIntf
brcdIp.1.1.3.2.2.1.6
Syntax: Integer Read-write Applies to routers only and is optional. It shows the virtual interface
of a router to the VLAN.
This object is not configured if an SNMP-Get is equal to zero
snVLanByProtocolRowStatus
brcdIp.1.1.3.2.2.1.7
Syntax: Integer Read-write Applies to all devices, except for ServerIron products.
Controls the management of the table rows. The values that can be
written are:
•
delete(3) – Delete the row
•
create(4) – Create a new row
•
modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row
•
invalid(1) – Row is inoperative
•
valid(2) – Row exists and is valid
snVLanByProtocolDynamicM
ask
brcdIp.1.1.3.2.2.1.8
Syntax: PortMask Read only Applies only to stackable ServerIron products. It shows the portmask,
which is the standalone switch Protocol VLAN active port
membership.
This object was obsoleted for Chassis devices.
snVLanByProtocolChassisSta
ticMask
brcdIp.1.1.3.2.2.1.9
Syntax: OctetString Read-write Applies to all devices, except for ServerIron products.
This object has 32 octets. This object shows the Chassis Protocol
VLAN port membership applied in static mode.
snVLanByProtocolChassisExc
ludeMask
brcdIp.1.1.3.2.2.1.10
Syntax: OctetString Read-write Applies to all devices, except for ServerIron products.
This object has 32 octets. This object shows the Chassis Protocol
VLAN port membership applied in exclusive mode.
Name, OID, and Syntax Access Description