Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 91)

Brocade Virtual ADX MIB Reference 79
53-1003312-01
MRP
snMetroRingRole
brcdIp.1.1.3.29.2.1.1.4
Syntax: Integer Read write Shows the Metro Ring role:
other(1) - non of the cases below
master(2) - device which originates RHP packets
member(3) - device which forwards RHP packets
snMetroRingHelloTime
brcdIp.1.1.3.29.2.1.1.5
Syntax: Integer32 Read write The time interval to periodically transmit ring health protocol
(RHP) in milliseconds.
snMetroRingPreforwardingTime
brcdIp.1.1.3.29.2.1.1.6
Syntax: Integer32 Read write The time interval that a metro ring stays in preforwarding state
before changing to forwarding state (in milliseconds).
snMetroRingPort1
brcdIp.1.1.3.29.2.1.1.7
Syntax: InterfaceIndex Read write The ifIndex value of port 1 to configure into the metro ring.
snMetroRingPort2
brcdIp.1.1.3.29.2.1.1.8
Syntax: InterfaceIndex Read write The ifIndex value of port 2 to configure into the metro ring.
snMetroRingName
brcdIp.1.1.3.29.2.1.1.9
Syntax: DisplayString Read write The description of the metro ring.
snMetroRingRowStatus
brcdIp.1.1.3.29.2.1.1.10
Syntax: Integer Read write Creates and deletes rows in the table, and controls whether they
are used. Values are:
•
delete(3) - deletes a row
•
create(4) - creates a new row
If the row exists, then a SET with a value of create(4) returns a
badValue error. Deleted rows disappear immediately. The
following values can be returned on reads:
•
noSuchName - no such row:
•
other(1) - some other cases
•
valid(2) - the row exists and is valid.
snMetroRingOperState
brcdIp.1.1.3.29.2.1.1.11
Syntax: Integer [other(1),
enabled(2), disabled(3)] Read only Shows the metro ring operational state.
snMetroRingTopoGroupId
brcdIp.1.1.3.29.2.1.1.12
Syntax: Integer32 Read only The ID of the topology group that controls the metro ring.
snMetroRingRHPTransmitted
brcdIp.1.1.3.29.2.1.1.13
Syntax: Counter32 Read only The Ring Health Protocol (RHP) transmitted counter.
snMetroRingRHPReceived
brcdIp.1.1.3.29.2.1.1.14
Syntax: Counter32 Read only The counter receive Ring Health Protocol (RHP)
snMetroRingStateChanged
brcdIp.1.1.3.29.2.1.1.15
Syntax: Counter32 Read only The counter for the number of times the ring state has changed.
snMetroRingTCRBPDUReceived
brcdIp.1.1.3.29.2.1.1.16
Syntax: Counter32 Read only The topology change protocol received counter.
Name, OID, and Syntax Access Description