Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 74)

62 Brocade Virtual ADX MIB Reference
53-1003312-01
Multi-slot trunk port table
Multi-slot trunk port table
The following table applies to multi-slot trunk ports. They show the ports that are members of a
trunk group. They apply to all devices unless otherwise specified in their descriptions.
snTrunkPortMask
brcdIp.1.1.3.6.1.1.2
Syntax: PortMask Read-write Shows the trunk port membership of the switch.
snTrunkType
brcdIp.1.1.3.6.1.1.3
Syntax: Integer Read-write Indicates if the trunk port is connected to a switch or a server:
•
switch(1)
•
server(2).
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snMSTrunkTable
brcdIp.1.1.3.6.2 None The Multi-slot Trunk Port Configuration Table.
snMSTrunkEntry
brcdIp.1.1.3.6.2.1 None An entry of the Multi-slot Trunk Port Configuration Table.
snMSTrunkPortIndex
brcdIp.1.1.3.6.2.1.1
Syntax: Integer32 Read only Identifies the port that is the primary port of a trunk group.
For module with Gigabit ports, the primary port is port 1, 3, 5, or 7.
For module with 10/100 ports, the primary port is port 1, 5, 9, 13,
17, or 21.
snMSTrunkPortList
brcdIp.1.1.3.6.2.1.2
Syntax: OctetString Read-write Contains a list of port indices that are members of a trunk group.
Each port index is a 16-bit integer in big endian order. The first port
index must be the index of the primary port.
snMSTrunkType
brcdIp.1.1.3.6.2.1.3
Syntax: Integer Read-write Specifies if the ports are connected to a switch or a server:
•
switch(1)
•
server(2)
snMSTrunkRowStatus
brcdIp.1.1.3.6.2.1.4
Syntax: Integer Read-write Applies to all devices, except for ServerIron products.
Creates, deletes, or modifies an entry in this table:
•
invalid(1)
•
valid(2)
•
delete(3)
•
create(4)
•
modify(5)