Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 71)

Brocade Virtual ADX MIB Reference 59
53-1003312-01
Interface ID lookup table
Interface ID lookup table
The Interface ID Lookup Table maps interface ID to the InterfaceIndex (ifIndex) Lookup Table. Given
an interface ID, this table returns the ifIndex value. The table is useful for mapping a known
interface to the corresponding ifIndex value.
NOTE
The contents of the table can only be accessed using Get operations. Unlike other SNMP tables, this
table does not support GetNext operations. If you try to walk the table using GetNext, no rows will be
returned.
snSwIfStatsOutKiloBitsPerSec
brcdIp.1.1.3.3.5.1.55
Syntax: Unsigned32 Read-only Shows the bit rate, in kilobits per second, transmitted from a 10
Gigabit or faster interface within a five minute interval.
snSwlfStatsInJumboFrames
brcdIp.1.1.3.3.5.1.56
Syntax: Counter64 Read only The total number of jumbo packets received on the interface.
snSwlfStatsOutJumboFrames
brcdIp.1.1.3.3.5.1.57
Syntax: Counter64 Read only The total number of jumbo packets transmitted out of the
interface.
snSwlfSInfoMirrorMode
brcdIp.1.1.3.3.5.1.58
Syntax: INTEGER Read only Provides the mirror mode status as described:
•
disable (0)
•
enable (1)
snSwlfMacLearningDisable
brcdIp.1.1.3.3.5.1.59
Syntax: Syntax: TruthVal Read-write DIsplays the status of MAC Learning on an ethernet port.
For POS ports, Get operation will return the default value and Set
operation will return an error.
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snInterfaceLookupTable
brcdIp.1.1.3.3.3 None The Interface Lookup Table
snInterfaceLookupEntry
brcdIp.1.1.3.3.3.1 None An entry in the Interface Lookup Table.
NOTE: This table is used only by IronView Network Manager. You
will receive an error if you try to implement a get-next.