Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 78)

66 Brocade Virtual ADX MIB Reference
53-1003312-01
Link Aggregation Group (LAG) table
fdryLinkAggregationGroupPortTable
fdryLinkAggregationGroupPrimaryPort
brcdIp.1.1.3.33.1.1.1.5
Syntax: InterfaceIndex Read-create DIsplays the primary port for the Link Aggregation Group.
This must be set before deploying the
LinkAggregateGroup unless this is a keepalive
LinkAggregateGroup.
fdryLinkAggregationGroupTrunkType
brcdIp.1.1.3.33.1.1.1.6
Syntax: Integer Read-create Displays the trunk connection type which specifies what
the scheme of load-sharing among the trunk ports is.
fdryLinkAggregationGroupTrunkThresh
old
brcdIp.1.1.3.33.1.1.1.7
Syntax: Unsigned32 Read-create DIsplays the number of UP ports needed to keep the
trunk up.
NOTE: This object is not applicable to Keepalive LAGs.
fdryLinkAggregationGroupLacpTimeout
brcdIp.1.1.3.33.1.1.1.8
Syntax: Integer Read-create Displays the LACP timeout value this LACP LAG will use.
Applicable for dynamic and keepalive LAG only.
fdryLinkAggregationGroupIfIndex
brcdIp.1.1.3.29.2.1.1.9
Syntax: InterfaceIndex Read only After a LAG is deployed, this object dIsplays information
for the LAG entry in the ifTable. Use this variabe to access
the entry in the ifTable and ifXTable. Zero is returned for
LAGs that have not been deployed.
fdryLinkAggregationGroupPortCount
brcdIp.1.1.3.33.1.1.1.10
Syntax: Unsigned32 Read only Displays the number of member ports belong to this LAG.
fdryLinkAggregationGroupRowStatus
brcdIp.1.1.3.33.1.1.1.11
Syntax: RowSts Read-create Displays the status of this conceptual row.
NOTE: createAndWait(5) is not supported.
To create a row in this table, a manager must set this
object to createAndGo(4) together with the setting of
fdryLinkAggregationGroupType. After that the row status
becomes active(1) regardless the LAG entry is deployed
or not.
To deploy the LAG entry, set the corresponding instance
of fdryLinkAggregationGroupAdminStatus to deployActive
or deployPassive.
fdryLinkAggregationGroupId
brcdIp.1.1.3.33.1.1.1.12
Syntax: Unsigned 32 Read only The numeric identifier assigned to this LAG.
Name, OID, and Syntax Access Description
fdryLinkAggregationGroupTable
brcdIp.1.1.3.33.2.1 N/A This table contains the Link Aggregation Control
Configuration information about every aggregation port
associated with this device. A row appears in this table for
each physical port.
fdryLinkAggregationGroupPortEntry
brcdIp.1.1.3.33.2.1.1 N/A An entry in the fdryLinkAggregationGroupTable.
fdryLinkAggregationGroupPortLacpPrio
rity
brcdIp.1.1.3.33.2.1.1.1
Syntax: Integer Read-write The LACP priority value assigned to this link aggregation
port. Values can be 0 - 65535. The default is 1.
Name, OID, and Syntax Access Description