Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 73)

Brocade Virtual ADX MIB Reference 61
53-1003312-01
Trunk port configuration group
Trunk port configuration group
The Trunk Group feature allows you to manually configure multiple high-speed, load-sharing links
between two switches or routers or between a switch and router and a server. Details on trunk
group configuration are discussed in the configuration guide for a product.
The following objects contain configuration of trunk port memberships.
snIfIndexLookupIfIndex
brcdIp.1.1.3.3.4.1.1
Syntax: Integer32 Read only Shows the interface in the ifIndex format.
snIfIndexLookupInterfaceId
brcdIp.1.1.3.3.4.1.2
Syntax: InterfaceId Read only Octet 0 – Port type, which can be one of the following:
•
1 – Ethernet
•
2 – POS
•
3 – ATM
•
4 – Virtual
•
5 – Loopback
•
6 – GRE Tunnel
•
7 – ATM Subif (Not supported)
•
8 – MPLS Tunnel (Not supported)
•
9 – ATM PVC (Not supported)
•
10 – Management (Not supported)
•
11 – Trunk (Not supported)
•
12 – IP Tunnel (for IP tunnels, except MPLS) (Not supported)
Octet 1
•
If the value of Octet 0 is 1,2,3,7 or 9, then this octet shows
the device’s slot number.
•
If the value of Octet 0 is 6 or 8, then this octet shows the
tunnel ID.
•
If the value of Octet 0 is 5, then this octet shows the
loopback ID.
•
If the value of Octet 0 is 4, then this octet shows a virtual ID.
Octet 2 – If the value of Octet 0 is 1,2,3,7 or 9, then this octet
shows the port number.
Octet 3 – If the value of Octet 0 is 7 0r 9, then this octet shows
the ATM Subif number).
Octet 4 – If the value of Octet 0 is 9, then this octet shows the
ATM VPI number.
Octet 5 – If the value of Octet 0 is 9, then this octet shows the
ATM VCI number.
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snTrunkTable
brcdIp.1.1.3.6.1 None The Trunk Port Table. A specific snTrunkTable consists of a
number of Trunk port-mask.
snTrunkEntry
brcdIp.1.1.3.6.1.1 None An entry in the trunk Port Table.
snTrunkIndex
brcdIp.1.1.3.6.1.1.1
Syntax: Integer Read only Shows the number of the trunk port entries that can be
configured.
Valid values: 1 – 64.