Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 253)

Brocade Virtual ADX MIB Reference 241
53-1003312-01
Virtual Server Statistics table
Name, OID, and Syntax Access Description
brcdSlbVSStatsName
brcdIp.1.1.4.37.1.3.3.1.1
Syntax: L4ServerName N/A Virtual Server name.
brcdSlbVSStatsCfgIpType
brcdIp.1.1.4.37.1.3.3.1.2
Syntax: InetAddressType Read-only The address type of the Virtual Server.
brcdSlbVSStatsIp
brcdIp.1.1.4.37.1.3.3.1.3
Syntax: InetAddress Read-only The IP address of the Virtual Server Stats entry.
brcdSlbVSStatsRxPkts
brcdIp.1.1.4.37.1.3.3.1.4
Syntax: Counter32 Read-only Number of packets received by the Virtual Server.
brcdSlbVSStatsTxPkts
brcdIp.1.1.4.37.1.3.3.1.5
Syntax: Counter32 Read-only Number of packets transmitted by the Virtual Server.
brcdSlbVSStatsTotalConnections
brcdIp.1.1.4.37.1.3.3.1.6
Syntax: Counter32 Read-only The number of client connections on the server since the
ServerIron ADX was last booted or restarted. A connection
consists of two sessions, the client-to-server session and the
server-to-client session.
brcdSlbVSStatsRxBytes
brcdIp.1.1.4.37.1.3.3.1.7
Syntax: Counter64 Read-only Number of bytes received by the Virtual Server.
brcdSlbVSStatsTxBytes
brcdIp.1.1.4.37.1.3.3.1.8
Syntax: Counter64 Read-only Number of bytes transmitted by the Virtual Server.
brcdSlbVSStatsSymmetricState
brcdIp.1.1.4.37.1.3.3.1.9
Syntax: INTEGER Read-only State of symmetric VIP:
•
disabled(1)
•
enabled(2)
•
activeCapable(3)
•
standby(4)
•
suspect(5),active(6)
brcdSlbVSStatsSymmetricPriority
brcdIp.1.1.4.37.1.3.3.1.10
Syntax: Unsigned32 Read-only The Symmetric SLB priority configured on the ServerIron ADX.
brcdSlbVSStatsSymmetricKeep
brcdIp.1.1.4.37.1.3.3.1.11
Syntax: Counter32 Read-only The number of times an SSLB backup has failed to
communicate with the active ServerIron ADX. By default, the
counter is incremented by 1 every 400 milliseconds the backup
ADX is late responding to the active ADX keepalive message. The
counter is reset to 0 each time the backup ServerIron ADX
replies to a keepalive message. If the counter goes higher than
the maximum number allowed (20 by default, thus 8 seconds),
the standby ServerIron ADX takes over as the new active
ServerIron ADX. Normally, this field almost always contains 0."
brcdSlbVSStatsSymmetricActives
brcdIp.1.1.4.37.1.3.3.1.12
Syntax: Counter32 Read-only The number of times this ServerIron ADX has become the active
ServerIron ADX.