Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 122)

110 Brocade Virtual ADX MIB Reference
53-1003312-01
VLAN by IP subnet configuration table
snVLanByIpSubnetStaticMask
brcdIp.1.1.3.2.3.1.5
Syntax: PortMask Read-write Applies only to stackable ServerIron products.It shows the port
membership of the standalone switch VLAN by Subnet in static
mode.
snVLanByIpSubnetExcludeMask
brcdIp.1.1.3.2.3.1.6
Syntax: PortMask Read-write Applies only to stackable ServerIron products.It shows the port
membership of the standalone switch VLAN by Subnet in
exclusive mode.
snVLanByIpSubnetRouterIntf
brcdIp.1.1.3.2.3.1.7
Syntax: Integer Read-write Applies only to routers and is optional. It shows the virtual
interface of a router to the VLAN.Valid values: 0 - 60. It is not
configured if an SNMP-Get is equal to zero.
snVLanByIpSubnetRowStatus
brcdIp.1.1.3.2.3.1.8
Syntax: Integer Read-write Controls the management of the table rows. The values that can
be written are:
•
delete(3) - Delete the row
•
create(4) - Create a new row
•
modify(5) - Modify an existing row. If the row exists, then a
SET with a value of create(4) returns a "bad value" error.
Deleted rows are removed from the table immediately.
The following values can be returned on reads:
•
noSuch(0) - No such row
•
invalid(1) - Row is inoperative
•
valid(2) - Row exists and is valid
snVLanByIpSubnetDynamicMask
brcdIp.1.1.3.2.3.1.9
Syntax: PortMask Read only Applies only to ServerIron stackable products. It shows the
standalone switch VLAN by Subnet active port membership.
snVLanByIpSubnetChassisStatic
Mask
brcdIp.1.1.3.2.3.1.10
Syntax: Octet string Read-write This object has 32 octets. It is replaced by the object
"snVLanByIpSubnetStaticPortList" in later releases.It shows the
chassis VLAN by Subnet port membership applied in static
mode.
snVLanByIpSubnetChassisExclu
deMask
brcdIp.1.1.3.2.3.1.11
Syntax: Octet string Read-write This object has 32 octets.It is replaced by the object
"snVLanByIpSubnetExcludePortList" in later releases. It shows
the chassis VLAN by Subnet port membership applied in
exclusive mode.
snVLanByIpSubnetChassisDyna
micMask
brcdIp.1.1.3.2.3.1.12
Syntax: Octet string Read-write This object has 32 octets.It is replaced by the object
"snVLanByIpSubnetDynamicPortList" in later releases. It shows
the chassis VLAN by Subnet port membership applied in
exclusive mode.
snVLanByIpSubnetVLanName
brcdIp.1.1.3.2.3.1.13
Syntax: Display string Read-write Shows the name of the community string that is allowed to
access the VLAN. Valid values: Up to 32 characters.
snVLanByIpSubnetStaticPortLis
tfdry.1.1.3.2.3.1.14
Syntax: Octet string Read-write This object is an index of ports that are the configured to be
members of the VLAN by IP Subnet. Each port index is a 16-bit
integer in big endian order. The first 8 bits are the slot number;
the other 8 bits are the port number.
Name, OID, and Syntax Access Description