Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 28)

16 Brocade Virtual ADX MIB Reference
53-1003312-01
Software Image
File download and upload
The following objects manage file downloads and uploads. They are available in all devices.
NOTES: When uploading or downloading configuration files to and from the TFTP server using
SNMP, check the following:
• If the SNMP password check is enabled on the device, the object “snAgGblPassword” on
page 33 must be sent with the following information in the same PDU as the TFTP objects:
 If the AAA is used for SNMP authentication and the authentication method is enable
or line, then the value of snAgGlbPassword must be in cleartext format.
 If the AAA is used for SNMP authentication and the authentication method is local,
RADIUS, TELNET, TACACS, or TACACS+, then the value of the snAgGlbPassword must
be in the format. The space between and is
the delimiter.
 If AAA is not used for authentication, then the value of snAgGlbPassword for the
enable password must be in cleartext format.
• Make sure that user has administrative access (privilege=0) on the device; otherwise, the
user will not be able to upload files to the TFTP server.
NOTE
An atomic set of snAgImgLoad, snAgImgFname, and snAgTftpServerIp (or snAgTftpServerAddrType
and snAgTftpServerAddr), is required for a successful download or upload.
Name, OID, and Syntax Access Description
snAgTftpServerIp
brcdIp.1.1.2.1.5
Syntax: IpAddress Read-write Shows the IP address of the TFTP server that is used to download and
upload image and configuration files.
snAgImgFname
brcdIp.1.1.2.1.6
Syntax: DisplayString Read-write Shows the name of the image file, including path, that is currently
associated with the system. When the object is not used, the value is
blank. It can have up to 32 characters.