Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 202)

190 Brocade Virtual ADX MIB Reference
53-1003312-01
Real server objects
Real server port configuration table
Real Server Port table contains all the ports that have been configured for the real server.
Most attributes are configured globally for the server’s port. This table allows you to change
individual port attributes and override global settings.
snL4RealServerCfgWeight
brcdIp.1.1.4.19.1.1.5
Syntax: Integer Read-write Specifies the server's weight relative to other real servers.
This weight is based on the number of session table entries
the ServerIron has for TCP or UDP sessions with the real
server. Set this object to 0 to disable it if a weight based on
the server response time is desired.
Valid values: 1 to 2000000
snL4RealServerCfgRowStatus
brcdIp.1.1.4.19.1.1.6
Syntax: L4RowStatus Read-write Controls the management of the table rows. The values that
can be written are:
•
delete(3) – Delete the row
•
create(4) – Create a new row
•
modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row
•
invalid(1) – Row is inoperative
•
valid(2) – Row exists and is valid
snL4RealServerCfgDeleteState
brcdIp.1.1.4.19.1.1.7
Syntax: L4DeleteState Read only Shows the state of the port being deleted:
•
done(0) – The port is deleted.
•
waitunbind(1) – The port is in an unbind state
•
waitdelete(2) – The port is in a delete state
snL4RealServerCfgSrcNat
brcdIp.1.1.4.19.1.1.8
Syntax: DisplayString (SIZE (1..10)) Read-only Returns the string “src-nat” if source NAT for the real server if
source NAT is configured; otherwise, the display is empty if
source NAT is not configured.
Name, OID, and Syntax Access Description
snL4RealServerPortCfgTable
brcdIp.1.1.4.20.1 None Real Server Port table.
snL4RealServerPortCfgEntry
brcdIp.1.1.4.20.1.1 None An entry in the Real Server Port Configuration table.
snL4RealServerPortCfgIP
brcdIp.1.1.4.20.1.1.1
Syntax: IpAddress Read only Specifies the IP address for the server.
snL4RealServerPortCfgServerName
brcdIp.1.1.4.20.1.1.2
Syntax: L4ServerName Read only Specifies the name of the server. This name must be
unique among the other servers.
Valid values: 1 – 32 octets
snL4RealServerPortCfgPort
brcdIp.1.1.4.20.1.1.3
Syntax: Integer Read only Specifies the port that the server port uses to listen for
connections
Valid values: 0 – 65535
Name, OID, and Syntax Access Description