Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 131)

Brocade Virtual ADX MIB Reference 119
53-1003312-01
IP general group
snRtIpSetAllPortConfig
brcdIp.1.2.2.1.12
Syntax: Integer32 Read-write Shows the index number of a row in the “snRtIpPortConfigTable” on
page 125 , such as “snRtIpPortConfigPortIndex” on page 125 . All the
writeable data from that row will be copied to all appropriate rows in all
IP Interface Port Configuration Tables
NOTE: Prior to setting this object, make sure that the row identified in
this object contains a value for all its objects; otherwise, the
current data of the row will be used to set the entire IP interface
configuration table.
snRtIpFwdCacheMaxEn
tries
brcdIp.1.2.2.1.13
Syntax: Integer32 Read only Shows the maximum number of entries in the “IP forwarding cache
table” .
snRtIpFwdCacheCurEnt
ries
brcdIp.1.2.2.1.14
Syntax: Integer32 Read only Shows the current number of entries in the “IP forwarding cache table” .
snRtIpMaxStaticRouteE
ntries
brcdIp.1.2.2.1.15
Syntax: Integer Read only Shows the maximum number of entries in the IP Static Route table.
snRtIpDirBcastFwd
brcdIp.1.2.2.1.16
Syntax: Integer Read-write Indicates if the directed broadcast forwarding feature is enabled:
•
disabled(0)
•
enabled(1)
snRtIpLoadShareNumO
fPaths
brcdIp.1.2.2.1.17
Syntax: Integer32 Read-write Specifies the number of routes to be used to share the load.
snRtIpLoadShareMaxP
aths
brcdIp.1.2.2.1.18
Syntax: Integer32 Read only Indicates the maximum number of routes that can be configured to
share the loads.
snRtIpLoadShareMinPa
ths
brcdIp.1.2.2.1.19
Syntax: Integer32 Read only Indicates the minimum number of routes that can be configured to
share the loads.
snRtIpProtocolRouterId
brcdIp.1.2.2.1.20
Syntax: IpAddress Read-write Shows the router ID for all IP Protocols.
snRtIpSourceRoute
brcdIp.1.2.2.1.21
Syntax: Integer Read-write Indicates if strict source routing is enabled to drop source routed
packets:
•
disabled(0)
•
enabled(1)
Name, OID, and Syntax Access Description