Ipv6 acl table – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 103

Brocade Virtual ADX MIB Reference
91
53-1003312-01
ACLs
IPv6 ACL table
This table is not supported on Virtual ADX devices.
Name, OID, and Syntax
Access
Description
fdryIpv6AclTable
brcdIp.1.2.16.1.1.1
Syntax: Sequence of FdryIpv6AclEntry
None
The IPv6 Access Control List table.
fdryIpv6AclEntry
brcdIp.1.2.16.1.1.1.1
Syntax: FdryIpv6AclEntry
None
An entry in the IPv6 Access Control List table.
fdryIpv6AclIndex
brcdIp.1.2.16.1.1.1.1.1
Syntax:
None
The index number for an ACL entry.
This is a unique number even though the name is not
unique for a given ACL with the same or different source
address, prefix length, destination address, destination
prefix length, protocol type, action (permit or deny) type,
and operator (neq, eq, gt, and lt).
fdryIpv6AclName
brcdIp.1.2.16.1.1.1.1.2
Syntax: DisplayString
(size (0..199))
Read-create
The ACL name for an entry.
fdryIpv6AclAction
brcdIp.1.2.16.1.1.1.1.3
Syntax: Action
Read-create
The action to take if the IP packet matches this ACL.
fdryIpv6AclProtocol
brcdIp.1.2.16.1.1.1.1.4
Syntax: IpProtocol
Read-create
The transport protocols. 0 means any protocol.
fdryIpv6AclSourceIp
brcdIp.1.2.16.1.1.1.1.5
Syntax: Ipv6Address
Read-create
The source IPv6 address.
fdryIpv6AclSourcePrefixLen
brcdIp.1.2.16.1.1.1.1.6
Syntax: Unsigned32
Read-create
The source IPv6 address prefix length.
fdryIpv6AclSourceOperator
brcdIp.1.2.16.1.1.1.1.7
Syntax: Operator
Read-create
The type of comparison to perform. This applies only to
TCP or UDP.
fdryIpv6AclSourceOperand1
brcdIp.1.2.16.1.1.1.1.8
Syntax: Unsigned32
Read-create
This object refers to the transport protocol port number.
fdryIpv6AclSourceOperand2
brcdIp.1.2.16.1.1.1.1.9
Syntax: Unsigned32
(0..65535)
Read-create
This object refers to the transport protocol port number.
fdryIpv6AclDestinationIp
brcdIp.1.2.16.1.1.1.1.10
Syntax: Ipv6Address
Read-create
The destination IPv6 address.
fdryIpv6AclDestinationPrefixLen
brcdIp.1.2.16.1.1.1.1.11
Syntax: Unsigned32
Read-create
The destination IPv6 address prefix length.