Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 123)

Brocade Virtual ADX MIB Reference 111
53-1003312-01
VLAN by port membership table
VLAN by port membership table
The following table is the Port VLAN (Layer 2 VLAN) port membership table.
Port VLAN configuration table
snVLanByIpSubnetExcludePortLi
st
brcdIp.1.1.3.2.3.1.15
Syntax: Octet string Read-write This object is an index of ports that are excluded from port
membership of the VLAN by IP Subnet. Each port index is a
16-bit integer in big endian order. The first 8 bits are the slot
number; the other 8 bits are the port number.
snVLanByIpSubnetDynamicPortL
ist
brcdIp.1.1.3.2.3.1.16
Syntax: Octet string Read only This object is an index of ports that can dynamically join the port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. The first 8 bits are the slot
number; the other 8 bits are the port number.
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snVlanByPortMemberTable
brcdIp.1.1.3.2.6 None This table is used to create or delete a port VLAN (Layer 2 VLAN)
entry.
snVLanByPortMemberEntry
brcdIp.1.1.3.2.6.1 None An entry in the Port VLAN Port Membership table.
snVLanByPortMemberVLanId
brcdIp.1.1.3.2.6.1.1
Syntax: Integer Read only The VLAN identifier (VLAN ID).
Valid values: 1 – 4095 VLAN IDs.
snVLanByPortMemberPortId
brcdIp.1.1.3.2.6.1.2
Syntax: Integer Read only The ifIndex which is a member of the port VLAN.
snVLanByPortMemberRowStatus
brcdIp.1.1.3.2.6.1.3
Syntax: Integer Read-write Controls the management of the table rows. The values that can
be written are:
•
delete(3) – Delete the row
•
create(4) – Create a new row
•
modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row
•
other(1) – Some other case
•
valid(2) – Row exists and is valid
Name, OID, and Syntax Access Description
snVLanByPortCfgTable
brcdIp.1.1.3.2.7 None The Port VLAN (Layer 2 VLAN) configuration table.
snVLanByPortCfgEntry
brcdIp.1.1.3.2.7.1 None An entry of the port VLAN configuration table.