System log server table – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 186

174
Brocade Virtual ADX MIB Reference
53-1003312-01
System logging
System log server table
The System Log (Syslog) Server Table shows which servers will receive Syslog messages. Every
server in this table will receive all Syslog messages.
snAgStaticSysLogBufferMessage
brcdIp.1.1.2.6.3.1.4
Syntax: DisplayString
Read only
The system logging message.
snAgStaticSysLogBufferCalTimeSta
mp
brcdIp.1.1.2.6.3.1.5
Syntax: DisplayString
Read only
A time stamp when the event is logged. This object is used only
if an external time source, such as an SNTP server, is
configured. Otherwise, the value of this object is 0.
If an SNTP server is used to maintain time, then this object
adds the value of the object
“snAgStaticSysLogBufferTimeStamp” to the SNTP base to
calculate the absolute time.
This object returns a NULL terminated time stamp string if the
system calendar time was set. It returns a blank if the system
calendar time was not set.
Name, OID, and Syntax
Access
Description
snAgSysLogServerTable
brcdIp.1.1.2.6.4
None
System Log Server Table
snAgSysLogServerEntry
brcdIp.1.1.2.6.4.1
None
A row in the System Log Server Table
snAgSysLogServerIP
brcdIp.1.1.2.6.4.1.1
Syntax: IpAddress
Read-write
IP address of System Log server
snAgSysLogServerUDPPort
brcdIp.1.1.2.6.4.1.2
Syntax: Integer
Read-write
UDP port number of the Syslog server.
Valid values: 0 – 65535
snAgSysLogServerRowStatus
brcdIp.1.1.2.6.4.1.3
Syntax: Integer
Read-write
Controls the management of the table rows. The values that can be
written are:
•
delete(3) – Delete the row
•
create(4) – Create a new row
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
•
other(1) – Other
•
valid(2) – Row exists and is valid
Name, OID, and Syntax
Access
Description