Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 231)

Brocade Virtual ADX MIB Reference 219
53-1003312-01
Monitor groups
Virtual server port history table
The Virtual Server Port History Group contains history data samples for each port on the virtual
server.
Name, OID, and Syntax Access Description
snL4VirtualServerPortHistoryTable
brcdIp.1.1.4.28.8 None The Virtual Server Port History Table.
snL4VirtualServerPortHistoryEntry
brcdIp.1.1.4.28.8.1 None An entry in the Virtual Server Port History Group table. An entry
is a historical sample of statistics on a particular virtual server
port. This sample is associated with the
“snL4VirtualServerPortHistoryControlEntry” object, which sets
up the parameters for a regular collection of these samples.
snL4VirtualServerPortHistoryIndex
brcdIp.1.1.4.28.8.1.1
Syntax: Integer Read only Shows the index entry as identified by the
“snL4VirtualServerPortHistoryControlIndex” .
snL4VirtualServerPortHistorySam
pleIndex
brcdIp.1.1.4.28.8.1.2
Syntax: Integer Read only An index that uniquely identifies this particular sample among
all samples associated with the same entry. This index starts at
1 and increases by one as each new sample is taken. There can
be up to 214,748,3647 samples.
snL4VirtualServerPortHistoryInter
valStart
brcdIp.1.1.4.28.8.1.3
Syntax: Time ticks Read only The value of sysUpTime at the start of the interval used to
measure data samples.
If the probe keeps track of the time of day, set the data sampling
to start at the beginning of the next hour.
NOTE: Following this rule may require the probe to delay the
collection of the first sample for an entry, since each
sample must be of the same interval. Also, data for the
sample that is currently being collected is not accessible
in this table until the end of its interval.
snL4VirtualServerPortHistoryRece
ivePkts
brcdIp.1.1.4.28.8.1.4
Syntax: Counter Read only Shows the number of packets the ServerIron has received from
the virtual server port.
snL4VirtualServerPortHistoryTrans
mitPkts
brcdIp.1.1.4.28.8.1.5
Syntax: Counter Read only Shows the number of packets the ServerIron sent to the virtual
server.
snL4VirtualServerPortHistoryTotal
Connections
brcdIp.1.1.4.28.8.1.6
Syntax: Counter Read only Shows the total number of client connections on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4VirtualServerPortHistoryCurC
onnections
brcdIp.1.1.4.28.8.1.7
Syntax: Integer Read only Shows the number of client connections currently on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4VirtualServerPortHistoryPeak
Connections
brcdIp.1.1.4.28.8.1.8
Syntax: Integer Read only Shows the highest number of client connections on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.