beautypg.com

Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual

Page 124

background image

112

Brocade Virtual ADX MIB Reference

53-1003312-01

Port VLAN configuration table

snVLanByPortCfgVLanId
brcdIp.1.1.3.2.7.1.1
Syntax: Integer

Read-write

The VLAN ID index to this table. Each VLAN Identifier can be a member
of multiple ports.
Valid values: 1 – 4095.

snVLanByPortCfgQos
brcdIp.1.1.3.2.7.1.2
Syntax: Integer

Read-write

Shows the quality of service settings for the devices.
For Stackable devices, the values can be one of the following:

low(0) – low priority

high(1) – high priority

For Chassis devices, the value can be one of the following:

level0(0)

level1(1)

level2(2)

level3(3)

level4(4)

level5(5)

level6(6)

level7(7)

snVLanByPortCfgStpMod
e
brcdIp.1.1.3.2.7.1.3
Syntax: Integer

Read-write

Indicates whether or not Spanning Tree Protocol (STP) is enabled:

disabled(0)

enabled(1)

snVLanByPortCfgStpPrior
ity
brcdIp.1.1.3.2.7.1.4
Syntax: Integer

Read-write

Shows the value of the dot1dStpPriority, which is the first two octets of
the STP or RSTP bridge ID. The STP and RSTP bridge IDs are eight
octets long. This object contains the writable portion of the bridge ID.
The last six octets are contained in the dot1dBaseBridgeAddress of
the object “snVLanByPortBaseBridgeAddress.”
Valid values: 1 – 65535.

snVLanByPortCfgStpGrou
pMaxAge
brcdIp.1.1.3.2.7.1.5
Syntax: Integer

Read-write

Shows the value of dot1dStpBridgeMaxAge, which is the last six octets
or the STP or RSTP bridge ID. All bridges use this object for MaxAge
when this bridge is acting as the root.
NOTE: 802.1D-1990 specifies that the range for this parameter is

related to the value of dot1dStpBridgeHelloTime in the object
“snVLanByPortStpGroupHelloTime”.

The granularity of this timer is specified by 802.1D-1990 to be
one second. An agent may return a badValue error if a set is
attempted to a value which is not a whole number of seconds.

(Refer to RFC 1493 Bridge MIB.)

Valid values: 6 – 40.

snVLanByPortCfgStpGrou
pHello Time
brcdIp.1.1.3.2.7.1.6
Syntax: Integer

Read-write

Shows the value of the dot1dStpBridgeHelloTime, which is the value
used by all bridges when this bridge is acting as the root.
The granularity of this timer is specified by 802.1D-1990 to be one
second. An agent may return a badValue error if a set is attempted to a
value which is not a whole number of seconds.
(Refer to RFC1493 Bridge MIB.)
Valid values: 1 – 10

Name, OID, and Syntax

Access

Description