Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 30)

18 Brocade Virtual ADX MIB Reference
53-1003312-01
Software Image
snAgCfgLoad
brcdIp.1.1.2.1.9
Syntax: Integer Read-write Downloads or uploads a configuration file to the agent. Use one of the
following values for SNMP set:
•
uploadFromFlashToServer(20) – Uploads the configuration file
from the flash to the TFTP server.
•
downloadToFlashFromServer(21) – Downloads the configuration
file from the TFTP server to flash.
•
uploadFromDramToServer(22) – Uploads the configuration file
from the DRAM to the TFTP server.
•
downloadToDramFromServer(23) – Downloads the configuration
file from the TFTP server to DRAM.
•
uploadFromFlashToNMS(24) – Uploads the configuration file from
flash to the network management system.
•
downloadToFlashFromNMS(25) – Downloads the configuration
file from the network management system to flash.
•
uploadFromDramToNMS(26) – Uploads the configuration file
from DRAM to a network management system.
•
downloadToDramFromNMS(27) – Downloads the configuration
file from the network management system to DRAM.
The following values may be read:
•
normal(1)
•
flashPrepareReadFailure(2)
•
flashReadError(3)
•
flashPrepareWriteFailure(4)
•
flashWriteError(5)
•
tftpTimeoutError(6)
•
tftpOutOfBufferSpace(7)
•
tftpBusy(8)
•
tftpRemoteOtherErrors(9)
•
tftpRemoteNoFile(10)
•
tftpRemoteBadAccess(11)
•
tftpRemoteDiskFull(12)
•
tftpRemoteBadOperation(13)
•
tftpRemoteBadId(14)
•
tftpRemoteFileExists(15)
•
tftpRemoteNoUser(16)
•
operationError(17)
•
loading(18)
•
tftpWrongFileType(29)
•
operationDoneWithNMS(28)
•
tftpWrongFileType(29)
•
downloadToDramFromServerOverwrite(30)
NOTE: The objects “snAgCfgFname” and “snAgTftpServerIp” are
required to allow the download or upload process to occur.
No write requests is allowed while a download or upload
process is in progress.
The snAgCfgEosTable objects must be sent along in one PDU
for network management systems to recognize values from
(24) to (27).
A separate write memory using the CLI or an SNMP “set
snAgWriteNVRAM” is required to save the configuration to
NVRAM.
This object requires a password to be set for the
snAgGblPassword object.
Name, OID, and Syntax Access Description