Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 108)

96 Brocade Virtual ADX MIB Reference
53-1003312-01
CAR
snVLanCARRowIndex
brcdIp.1.1.3.17.1.1.1.3
Syntax: Integer Read only Shows the table index for rate limit objects for the VLAN. Rows are
numbered in sequential order. When a row is added, it is assigned the
next sequential number. When a row is deleted, the row is skipped.
snVLanCARType
brcdIp.1.1.3.17.1.1.1.4
Syntax: Integer Read only Shows the type of traffic to which the rate limit is applied.
•
all(3) – all traffic.
•
standardAcc(1) – traffic matches standard access list.
•
quickAcc(2) – traffic matches rate-limit’s access list.
snVLanCARAccIdx
brcdIp.1.1.3.17.1.1.1.5
Syntax: Integer32 Read only Indicates the index to the access list if rate limit type is one of the
following:
•
standardAcc(1) – traffic matches standard access list.
•
quickAcc(2) – traffic matches rate-limit’s access list.
snVLanCARRate
brcdIp.1.1.3.17.1.1.1.6
Syntax: Integer32 Read only Shows the committed access rate for long term average transmission
for this VLAN. This rate is in bits per second. Traffic that falls under this
rate always conforms to this rate.
snVLanCARLimit
brcdIp.1.1.3.17.1.1.1.7
Syntax: Integer32 Read only Shows the normal burst size in bytes. Normal burst size is the number of
bytes that are guaranteed to be transported by the network at the
average rate under normal conditions during the committed time
interval.
snVLanCARExtLimit
brcdIp.1.1.3.17.1.1.1.8
Syntax: Integer32 Read only Shows the extended burst limit in bytes. The extended burst limit
determines how large traffic bursts can be before all the traffic exceeds
the rate limit.
snVLanCARConformActi
on
brcdIp.1.1.3.17.1.1.1.9
Syntax: Integer Read only Indicates what happens to packets when the traffic is within the Rate
Limit.
•
continue(1) – Continue to evaluate the subsequent rate limits.
•
drop(2) – Drop the packet.
•
precedCont(3) – Rewrite the IP precedence and transmit the
packet.
•
precedXmit(4) – Rewrite the IP precedence and transmit the
packet.
•
xmit(5) – Transmit the packet.
snVLanCARExceedActio
n
brcdIp.1.1.3.17.1.1.1.10
Syntax: Integer Read only Indicates what happens to packets when the traffic exceeds the Rate
Limit.
•
continue(1) – Continue to evaluate the subsequent rate limits.
•
drop(2) – Drop the packet.
•
precedCont(3) – Rewrite the IP precedence and transmit the
packet.
•
precedXmit(4) – Rewrite the IP precedence and transmit the
packet.
•
xmit(5) – Transmit the packet.
snVLanCARStatSwitche
dPkts
brcdIp.1.1.3.17.1.1.1.11
Syntax: Counter64 Read only Indicates the number of packets permitted by this rate limit.
snVLanCARStatSwitche
dBytes
brcdIp.1.1.3.17.1.1.1.12
Syntax: Counter64 Read only Indicates the number of bytes permitted by this interface.
Name, OID, and Syntax Access Description