Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 194)

182 Brocade Virtual ADX MIB Reference
53-1003312-01
CPU utilization table
snAgentCpuUtilTable (ServerIron JetCore)
brcdAdxCpuUtilModuleT
ype
brcdIp.1.1.2.11.2.1.1
Syntax: Integer N/A The type of module installed in the device, which contains the cpu:
•
mp(1) = Management Processor
•
asm(2) = Application Switch Module
brcdAdxCpuUtilModule
Num
brcdIp.1.1.2.11.2.1.2
Syntax: Integer N/A The module number which identifies the particular module- ype in the
system.
brcdAdxCpuUtilCpuId
brcdIp.1.1.2.11.2.1.3
Syntax: Integer N/A The CPU ID. For management module (MP), there is one CPU. For the
ASM module, there are a number of CPUs."
brcdAdxCpuUtilInterval
brcdIp.1.1.2.11.2.1.4
Syntax: Integer N/A The value, in seconds, for this utilization. For both management and
slave CPU, utilization is displayed for 1 sec, 5 sec, 60 sec and 300 sec
interval.
brcdAdxCpuUtilValue
brcdIp.1.1.2.11.2.1.5
Syntax: Gauge32 Read-only The statistical CPU utilization in units of one-hundredth of a percent.
Name, OID, and Syntax Access Description
snAgentCpuUtilTable
brcdIp.1.1.2.11.1 N/A Table to list utilization for all CPUs in a ServerIron JetCore device.
snAgentCpuUtilEntry
brcdIp.1.1.2.11.1.1 N/A A row in the CPU utilization table.
snAgentCpuUtilSlotNum
brcdIp.1.1.2.11.1.1.1
Syntax: Integer Read-only The slot number of module that contains the CPU.
snAgentCpuUtilCpuId
brcdIp.1.1.2.11.1.1.2
Syntax: Intege Read-only The ID of the CPU:
For non-VM1/WSM management module, there is one CPU.
For VM1/WSM there's one management CPU and three slave CPUs.
The management CPU could be turned off.
For POS and ATM there is no management CPU but two slave CPUs.
The ID for management CPU is 1. A value of 2 and greater identifies
the slave CPUs.
snAgentCpuUtilInterval
brcdIp.1.1.2.11.1.1.3
Syntax: Intege Read-only The value, in seconds, for this utilization. For both management and
slave CPU, we display utilization for 1 sec, 5 sec, 60 sec and 300 sec
interval.
snAgentCpuUtilValue
brcdIp.1.1.2.11.1.1.4
Syntax: Intege Read-only The statistical CPU utilization in units of one-hundredth of a percent.
Name, OID, and Syntax Access Description