Teledyne LeCroy Sierra M124 User Manual - Manual (Page 62)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
60 Sierra M124 SAS/SATA Protocol Analyzer User Manual
Figure 2.16: SAS: Choosing Capture Patterns
SAS vs. SATA: SATA Dialog replaces “Exclude SATA_CONT” with “Exclude CONT” and
“Exclude SATA_SYNC” with “Exclude SYNC”.
The SAS Parameters window displays the following pattern capture choice categories:
 STP Frame
 Address Frame
 SMP Frame
 SSP Frame
 Data Pattern
 Protocol Errors
The SATA Parameters window displays the following pattern capture choice categories:
 FIS
 STP Frame
 Data Pattern
 Protocol Errors
Choose a Parameter
To choose a parameter for capture from any of these categories, highlight the category in
the parameter window and click the Add>> button. This opens selection dialogs for each
of the categories, displaying all parameters for that category. All of the patterns added
appear in the project tree.