Teledyne LeCroy Sierra M124 User Manual - Manual (Page 59)

Sierra M124 SAS/SATA Protocol Analyzer User Manual 57
SAS/SATA Software Menus and Toolbars Teledyne LeCroy
*.sts SATA Sample file (in the SATA Examples folder “Sample” subfolder)
*.tsh SATA Search configuration file
*.wss SAS Workspace file (in the SAS System folder “Predefined\Workspace”
subfolder)
*.wst SATA Workspace file (in the SATA System folder “PreDefined\Workspace”
subfolder)
Example Projects
The Analyzer includes example projects that you can use to perform an immediate
analysis without any setup.
The Analyzer system software has a pre‐defined folder (directory) structure for storing all
files. All example files are in the Examples folder under the Sierra M124 folder.
It is strongly recommended that you open some example files to see types of projects
that you can create.
Run an Example Analysis Project
To run an example project:
1. Select File > Open.
2. Locate example analysis projects by looking in the Examples folder. Examples are
available for AdvanceCaptr, EasyCaptr, Exerciser, Samples, and User Define Decoding
Script.
3. In the EasyCaptr folder, choose an example *.sac file and click Open to display the
example project dialog.
Figure 2.13: File Open Dialog