Teledyne LeCroy Sierra M124 User Manual - Manual (Page 60)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
58 Sierra M124 SAS/SATA Protocol Analyzer User Manual
Figure 2.14: SAS: Sample Protocol Analysis Project
SAS vs. SATA: For Pattern Parameters, SATA Dialog adds FIS, FIS Pattern, and ATA
Command Pattern and does not have SSP Frame, SMP Frame, and Address Frame.
4. Click the Record button to execute the pre‐defined example.
5. After the project runs, you see an analyzer trace capture display similar to the one
shown in Figure 2.15 on page 59