Teledyne LeCroy Sierra M124 User Manual - Manual (Page 338)

Teledyne LeCroy Sierra Trainer Generation Language
336 Sierra M124 SAS/SATA Protocol Analyzer User Manual
 BROADCAST: CHANGE, RESERVED 0, RESERVED 1, RESERVED 2, RESERVED 3,
RESERVED 4, RESERVED CHANGE 0, or RESERVED CHANGE 1
 DONE: ACK/NAK TIMEOUT, CREDIT TIMEOUT, NORMAL, RESERVED 0, RESERVED
1, RESERVED TIMEOUT 0, or RESERVED TIMEOUT 1
 SATA FLOW CTRL PRIMITIVE
 SATA IDLE PRIMITIVE
 SAS PS PRIMITIVE: PS_REQ_PARTIAL, PS_REQ_SLUMBER, PS_ACK, or PS_NAK
Wait Commands
Syntax:
WAIT_FOR { ... ... }
Wait Command Name Description
WF_TIMEOUT Timeout Credit Available
When WF_TIMEOUT is requested in WAIT_FOR
command, the wait session will be released after
timeout has elapsed.
The Timeout value can be set two different ways:
1. Through the global WaitTimeout setting that
can appear anywhere in generation. Default value
is 1000 microseconds.
Syntax:
Set WaitTimeout = (in microseconds)
2. Through local WaitTimeout value for this
specific wait session.
Syntax:
WAIT_FOR ()
{WF_TIMEOUT }
In this case wait for other commands will be
released no later then after
number_of_microseconds, but global
WaitTimeout value remains unchanged for future
use.
See Generation\Include\
WaitCommands.inc in the program folder for the
samples of syntax.
WF_SOF primitive
WF_EOF primitive
WF_SOAF primitive
WF_EOAF primitive
WF_ACK primitive
WF_NAK_CRC_ERROR primitive
WF_NAK_RESERVED_0 primitive