Teledyne LeCroy Sierra M124 User Manual - Manual (Page 109)

Sierra M124 SAS/SATA Protocol Analyzer User Manual 107
SAS/SATA Software Menus and Toolbars Teledyne LeCroy
State Number for Complex Trigger Sequences
To follow the path of complex trigger sequences, you can display state number.
To see state number, in Packet View right‐click a link layer packet, show field, and select
state number.
Setting Trigger Conditions
To set the If and Else If trigger condition:
1. Click the Add Pattern button for a Pattern field and choose a trigger condition
from the drop‐down list.
Figure 2.78: SAS: Choosing a Trigger Condition
2. Define each selected pattern in the same way as in Easy Mode, as described starting
on page 62 . To use a timer, define it first.
Note:
You can set a timer for any If or Else If condition.
3. Enter a value for the number of occurrences before trigger in the Cont field, up to a
maximum of 65535 occurrences.
4. Choose a capture option: Everything, Nothing, or Pattern.
5. If you choose Pattern, you can select patterns for inclusion or exclusion. Clicking the
Pattern option enables a pattern definition dialog (see Figure 2.79 on page 108 ).