Teledyne LeCroy Sierra M124 User Manual - Manual (Page 192)

Teledyne LeCroy Port Status
190 Sierra M124 SAS/SATA Protocol Analyzer User Manual
You can expand or collapse specific packets and commands by clicking on the or
buttons.
Figure 3.117: Expand/Collapse Specific Layers.
3.8 Port Status
You can get an overview of the active ports by clicking the Port Status button at the
bottom right of the application window.
The Port Status displays the Port, Speed, and Analyzer.
In addition to displaying OOB, Link, Frame, and Error, a display showing the % buffer full
opens when a trigger occurs.
Figure 3.118: Port Status Window and Capturing Time
1.Pre‐trig capturing (trig is 50%)
2. Trig point (shown by red bar; 36% pre trig was captured)
3. Post‐trig capturing (50% post‐trig was captured and capturing has stopped)
Note: If sample capture occurs with more than one unit active, additional Port Status windows display.