Teledyne LeCroy Sierra M124 User Manual - Manual (Page 190)

Teledyne LeCroy Packet View Toolbar
188 Sierra M124 SAS/SATA Protocol Analyzer User Manual
Byte Order
You can change the byte order in fields marked by an arrow and other fields.
Right‐click in the field, select Byte Order, and choose the ordering.
Figure 3.112: Byte Order
Note: A blue arrow in the byte order field indicates that it has been changed.
Choose Data Format
You can display data values either in hexadecimal (default) or binary. To choose data
format, right‐click the mouse over a data field, and choose Format and the format.
Figure 3.113: Format
Show All Data
To display all captured data, click the data expand toggle arrow in a data field, to examine
the data in detail.
Figure 3.114: Show All Data
Data expand toggle