Teledyne LeCroy Sierra M124 User Manual - Manual (Page 293)

Sierra M124 SAS/SATA Protocol Analyzer User Manual 291
Overview of Generation and Global Settings Files Teledyne LeCroy
Figure 5.11: Sierra Trainer Generator File
5.5.5 Layout
The .ssg file has several colored bars that represent global settings. The bars show the
current configuration of the generation file. Example settings are:
 Configuration
 GenMode (SAS or SATA, SSC On or Off)
 Link speed (1.5 Gbps, 3.0 Gbps, 6.0 Gbps or 12.0 Gbps)
 Type of device (Initiator or Device)
 COMINIT
 COMWAKE
 Scrambling Mode
As changes are made and saved to the traffic generation file, the bars immediately
update. The traffic pattern to generate appears below the bars as a series of frames. You
can edit the traffic generation file to add, edit or remove frames.
5.6 Overview of Generation and Global Settings Files
Example .ssg files and Include files are in two directories called \Samples and \Include
that are typically installed in: C:\Program Files\LeCroy\SAS/SATA Protocol
Suite\Generation.