Teledyne LeCroy Sierra M124 User Manual - Manual (Page 170)

Teledyne LeCroy Navigation + View Toolbar
168 Sierra M124 SAS/SATA Protocol Analyzer User Manual
 ATA Commands
 SCSI Command Status (see “Filter Check Condition” on page 169 )
 Source SAS Address
 Destination SAS Address
 Pair SAS Address
 Protocol Error
 STP Port
 Tag (see “Filter by Tag Number” on page 170 )
 ATAPI SCSI Command
 Device Sleep
 Miscellaneous (see “Filter Miscellaneous” on page 170 )
 Training Sequence
Command Data Pattern
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured Command Data Patterns in the Trace Viewer.
Bus Condition
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured Bus Conditions in the Trace Viewer.
Incomplete Frames
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
Incomplete Frames in the Trace Viewer.
ATA Command
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured ATA commands in the Trace Viewer.
Protocol Error
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured packets with the specified Protocol Errors in the Trace Viewer.
ATAPI SCSI Command
When selected, depending on the Filter Type, the Show/Hide selection shows or hides
ATAPI SCSI commands (see
Figure 3.86 on page 169 ).