Teledyne LeCroy Sierra M124 User Manual - Manual (Page 26)

Teledyne LeCroy Expandability
24 Sierra M124 SAS/SATA Protocol Analyzer User Manual
Add Device...
Click Add Device to add a device with a static IP address.
Note:
You must close and re‐open the application when changing to static IP mode through the front
panel instead of the application.
Figure 1.10: Add Device with Static IP Dialog
Remove Device
Click Remove Device to remove a previously added device.
IP Settings...
Click IP Setting to reset IP settings of a device. The following IP Setting dialog displays.
Figure 1.11: IP Setting Dialog
Networks...
Click Networks to select a network adapter. The following dialog displays.
Figure 1.12: Select Adapter Dialog