EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 98)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
96
display.
Depending on the CLIP/CAM mode defined by the D key, the selected
keyword will be assigned only to the camera angles loaded on the
channels fully controlled by the operator at that time (CAM mode), or to
all camera angles of the clip (CLIP mode). The keyword will be assigned
to the first available keyword location on the 1
s t line of the LCD display.
If the “Keyword Info” parameter of the Setup is set to “Yes”, it will also
appear on the OSD of the corresponding monitoring outputs if the current
picture is the Short IN point of the clip.
If all 3 keywords location are occupied, the operator has to clear some of
them to be able to assign a new keyword to that clip.
To clear one of the keywords already assigned, press CLEAR + F1 / F2 /
F3 in the secondary clip menu.
The clip can also be named based on the keywords. Press the NAME
function (C key) in the secondary menu, then select keywords. The
keywords will be added to the name of the clip, up to 12 characters. In
this mode, the name of the clip is visible on the OSD. It can also be
edited with the following keys :
- CLEAR : erase the last character
- SHIFT+CLEAR : insert a blank
- SHIFT+F1-F10 : insert a number (1, 2, 3, …, 8, 9, 0)
Once the name is complete, press ENTER to validate or MENU to cancel.
While the operator is in the secondary menu, he has full control of the
current clip with the LEVER, PLAY key and JOG DIAL, so he can browse
the clip and start a replay at any time.
It is also possible to assign keywords and ranking to a clip before it is
created. Indeed, when a record train is loaded, as soon as the operator
marks an IN or OUT point, the main and secondary menu changes to
make the keyword functions available.
The SHIFT+A function of the main menu, normally used by the RESET
CAM function, can be used to define the ranking, without entering the
secondary menu. For additional functions like selecting keywords,
flagging the future clip for archiving, marking it to be pushed to another
machine, defining its name from the keywords, they can be performed
from the secondary menu, exactly the same way as for a clip already
stored. All these settings are memorized and will be applied to the clip
P G M 1 C a m A * P R V 1 * C a m B
P u s h P g m S p d S w T o I n P r e f
> A r c h i v e * * * N a m e C a m
P . 1 B . 1 C l i p s : L o c a l R e c o r d s : L o c a l
P L 1 1 : < >
M s g :
* * * L o c a l S y n c P r v 2 n d C T R L
C a m A C a m B C a m C C a m D