EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 133)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
131
Operating with XNet
After the selection of remote system, the operation with remote clips or
remote trains is similar to the operations on LOCAL system.
HOW TO RECALL/PLAY BACK A REMOTE CLIP?
1. Select the CLIP mode in the Network Menu
2. Then select the REMOTE LSM from the list
Note: The LCD display returns to the normal mode
3. Select the CLIP PAGE 1, 2, 3, … to 10 (PAGE key).
Note: When selecting a LSM-XT, it will automatically reconnect to the page and
bank that was last used.
4. Select the BANK in which the desired CLIP is located
5. Choose the CLIP required (F1 - F10).
If all clips are present (from Camera A, B, C and D), they will
appear in their respective locations (Channel A, B, C or D).
The label of a remote clip is different in order to identify it easily among
other clips:
HOW TO NAME A REMOTE CLIP?
1. Select the CLIP mode in the Network Menu
2. Select the REMOTE LSM in the list.
3. Go to the clip screen on the VGA, all banks of remote system are now
displayed.
4. Select the clip to name.