EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 35)

EVS MULTICAM - User’s Manual
EVS Broadcast Equipment SA – Dec 2006
Version 8.03
33
Special Control Settings p.7.3
Main RS422 Second. RS422
PGM5:[F1]---------- -- [F5]---------- --
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
Multicam is now capable of operating in LSM Base Config with 5 play
channels assigned. This added Protocol assignment page is where the
user can define the protocols and ports to manage this channel.
The LSM remote by itself cannot control 5 PGM channels at one time, two
remotes or devices must be used.
Special Control Settings p.7.4
Control type OSD Display
PGM1:[F1]Parallel [F5] Main
PGM2:[F2]Exclusive
PGM3:[F3]Exclusive
PGM4:[F4]Exclusive
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
Default : Exclusive
This page allows the user to now allow channels to either be controlled in
‘Exclusive’ control (same as was allowed in the past with 2
n d Control
Mode) or in Parallel Mode.
In Parallel mode, the user can define which device will manage the OSD
display characters.
Special Control Settings p.7.5
Control type OSD Display
PGM5:[F1]Exclusive [F5] Main
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
This page is the same as Page 7.4, but assigns PGM5
GPI In Settings p.8.1
GPI# Channel/Device Port Function
1 [F1]PGM1 -- [F5]Play
2 [F2]PGM2 -- [F6]Play
3 [F3]PGM3 -- [F7]Play
4 [F4]PGM4 -- [F8]Play
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
GPI In Settings p.8.2