EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 154)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
152
o EJECT : if the play channel is not yet in E2E mode when the
command is sent, it will return to E2E mode on its default
record train (similar to receiving a REC command). If the play
channel is already in E2E mode, it will switch to the next
record channel available (AÆBÆCÆ…ÆAÆ…). This is for
example useful with a BVE edit controller to allow the editor to
select the record train he wants to work with.
The Louth VDCP protocol is a more complex protocol mainly used by
automation systems but also by Sony switchers. It is not based on the
Sony BVW75, and can handle clips as well as playlists.