EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual User Manual

Page 27

EVS

MULTICAM - User’s Manual

EVS Broadcast Equipment SA – Dec 2006

Version 8.03

Wipe Type:
(Vert. L>R / Vert. R>L)
Selects vertical wipe effects from Left to Right or from Right to Left.
Default : Vert (L>R)

Default Plst Speed:
(Unknown, then from 0% to 100%)
Default speed used for clips entered into playlist. Unknown means that
the speed of the previous clip in the playlist will be used as a reference
for the current clip. 0% will force the playlist to pause at the end of the
previous clip.
Default: Unknown

Insert in Playlist:
(After / Before)
selects the mode for «INSERT» function of playlist : the new clip will be
inserted after or before the current clip in the playlist.
Default: After

Confirm Ins/Del clip:
(No / Yes)
If enabled, a confirmation will be required everytime the operator wants to
add a clip to the playlist or remove a clip from the playlist.
Default: No

Playlist p.4.2

[F1]Split audio editing : Disable

[F2]Extend split transition: End Cut

[F3]Swap audio tracks : Auto

[F4]Playlist loop : No

[F5]Load playlist : Always

[F6]Playlist auto fill : All Cam

[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn

Split Audio :
(Disable / Enable)
This parameter enables or disables the Split Audio Editing option in
Playlist mode. Changing this parameter modifies the display on the
monitoring outputs and adds special function keys on the LCD screen to
define different transition points and durations on the video and audio
tracks.
Default: Disable

Note: A specific license code (option 112 : Playlist Mgmt Advanced) is required to enable

split audio editing.

Extend split transition:
(Center (on) Cut / End (on) Cut / Start (on) Cut / Ask)
Determines how the transition should be extended when modifying the
transition duration on the audio or video track only. This parameter is
only useful when performing split audio editing.
- Center Cut : extend equally on both sides of the transition
- End Cut : extend the beginning of the transition to the left so that the

end of the transition is unchanged

- Start Cut : extened the end of the transition to the right so that the

beginning of the transition is unchanged